Building Technology

Прочитайте и переведите текст со словарем.

BUILDING TECHNOLOGY

Сделайте сообщение о роли вашей специальности в XXI веке.

1. Прочитайте, запомните следующие слова и словосочетания:

 

lime ['laIm] известь
gypsum ['GIpsqm] гипс
masonry ['meIsnrI] каменная кладка
high alumina cement [haI'q'ljHmInq sq'ment] цемент с высоким содержанием глинозема  
crushed stone ['krASt 'stoun] щебень
mortar ['mLtq] строительный раствор
aggregate ['xgrIgIt] заполнитель
compressive load [kqm'presIv 'lqud] нагрузка на сжатие
concrete ['kONkrJt] бетон
reinforced concrete   ['rJInfLst 'kONkrI:t] железобетон
availability [q"veIlq'bIlItI] пригодность; наличие
durability ["djuqrq'bIlItI] прочность
ability [q'bIlItI] способность
porosity [pL'rOsItI] пористость
binder ['baIndq] вяжущее вещество
alkali-slag ['xlkqlaI 'slxg] шлакощелочной
silica ['sIlIkq] кремнезем

 

I am a second – year student of the Bratsk State University. Building holds one of the main places in the economy of any country.

A great variety of materials are used by builders now. They should meet several requirements, such as availability, cost, physical properties of materials and others. The most commonly used materials are: steel, concrete, stone, wood and brick. They differ in hardness, durability and fire – resistance. Wood, stone and bricks are the oldest building materials. They have mechanical strength, compactness, porosity, sound and heat insulation.

Concrete made with natural hydraulic binders was used in antiquity by the Romans. Then the art of making concrete has been forgotten and the revival came much later. Lime, gypsum and cement are the 3 materials most widely used for the purpose of binding together masonry units, such as stone, brick and as constituents of wall plaster. Cement is the most important component of concrete. To undergo high compressive loads is a specific characteristic of it. Concrete increases its strength with age, it is fireproof. Concrete can be divided into 2 classes: mass or plain concrete and reinforced concrete.

Reinforced concrete is used in all civilized countries as one of the most important building materials. One of the essential properties of this concrete is its compressive strength.

Builders produce 2 types of new building materials: alkali-slag concrete and silica concrete. Silica concrete is widely used in aviation and in under water constructions. Another important class of cement is high alumina cement. It is very resistant to chemical attack.

Nowadays, much attention is paid to the light-weight concretes composed of light aggregates. They are called “cellular” concretes made by using materials which foam or form gas during the mixing of the concrete. The reduction in weight increases its ability to keep heat.

To become good specialists students study the existing materials and building methods. The person entering this profession must have a scientific attitude, imagination, initiative and good judgement obtained by experience and serious work.

 

3. Прочитайте следующие интернациональные слова, обращая внимание на их произношение и перевод:

to adapt [q'dxpt]
material [mq'tIqrIql]
physical ['fIzIkl]
cement [sI'ment]
chemical ['kemIkql]
slag ['slxg]
method ['meTqd]
technology [tek'nOlqGI]
test ['test]

 

4. Образуйте глаголы от существительных:

 

selection, designer, considerable, mixture, resistant, production, measuring.

 

5. Сгруппируйте следующие предложения по темам:

A. The choice of materials for any work of construction.

B. The properties of high alumina cement.

C. The composition of concrete.

 

1. Another important class of cement is high alumina cement. 2. Such a material may be considered as an artificial conglomerate of crushed stone or gravel with a mortar. 3. The civil engineer must consider many factors when selecting the materials for construction. 4. This kind of cement is very resistant to chemical attack. 5. The principal object in proportioning concrete is the production of a durable material of adequate strength and watertightness (водонепроницаемость). 6. The factors that condition the selection of materials for construction include availability, cost and physical properties. 7. This material has an extremely high rate of strength increase. 8. Timber, steel and concrete vary over considerable ranges in the properties desired by the engineer and the latter should take them into consideration in selecting the materials. 9. The most accurate method of measuring proportions for concrete is to weigh the required quantities of each material.